GE EST iO64

Chapter 3: Programming
126 EST iO64 and iO500 Technical Reference Manual
Loop Configuration
Correlation Groups
Device
Mapping
⇩
Mapping
Loop 1 No<>
Loop 2 No<>
Save
-OR-
Mapping
Enable No<>
Save
⇩
Mapping
Loop 1 No<>
Loop 2 No<>
Save
-OR-
To disable mapping:
1. Access the loop configuration options menu. See "Loop
configuration options."
2. Choose Mapping.
3. Select the loop for which you want to disable mapping. If your
system only has one loop, go to the next step.
4. Select No to disable mapping.
5. Choose Save.
6. Continue programming your system or press Menu to exit menu
mode.
Mapping
Enable No<>
Save