Chapter 1: System operation
28 EST iO64 and iO500 Technical Reference Manual
Conducting a lamp test
A lamp test lights all of the LEDs on the panel and the LED
annunciator and tests the LCD display so that you can verify proper
operation. LEDs stay on for 15 seconds.
Reports
Test
Control
Program
⇩
To conduct a lamp test:
1. Press the Menu button.
2. Choose Test.
3. Choose Lamp Test.
4. Press Enter.
5. Verify proper operation of all LEDs on the panel, the LCD display,
and the LED annunciator (if used).
Test
Test Fire
Dialer
Lamp Test
To Next Page
Loading...
