Chapter 3: Programming
142 EST iO64 and iO500 Technical Reference Manual
Panel Configuration
Ann. Class
Annunciator
CMS Device
⇩
CMS Device
Dialer
Network
Swngr Shtdn Rp. 200>
⇩
Network
Account ID 6769
IP 000.000.000.000
TCP/IP Port 00000
⇩
To program the network (receiver):
1. Access the panel configuration options menu. See "Panel
configuration options."
2. Choose CMS Device.
3. Choose Network.
4. Program the network using the "Network programming options"
table above. For network default settings, see "Factory default
settings."
5. When you're finished programming each option, choose Save.
6. Continue programming your system or press Menu to exit menu
mode.
Network
Receiver# 0000
Line# 0000
Save