GE Evolve - Section 4: Power Door Replacement (EASA;EASB); EASA;EASB Power Door Removal Procedure

Evolve™ LED Area Light
Scalable Fixtures (EAS)
Troubleshooting
and Repair Guide
Section 4: Power Door Replacement (EASA/EASB)
• Disconnect and isolate incoming power to the fixture.
• Separate both halves of the Primary disconnect.
• Separate both halves of the Light Engine disconnect.
• Allow door to swing back and pivot, then lift off of hinges.
*Actual shape and color of connectors may vary.
*Actual shape and color of connectors may vary.
Hinge
pivots
Hinge
pivots