What to do if liquid misses the tubes in GE Frac-920?
If the liquid is missing the tubes during fraction collection, verify the following: * Ensure the DropSync unit is positioned closely enough over the tubes. * Confirm that the rack is correctly fitted to the rack holder. * Check that the capillary end is cut cleanly and straight. * Verify that the correct rack type is selected in the system settings.
What to do if DropSync is not functioning in GE Frac-920?
If the DropSync is not functioning correctly, there are a few things you can check: * Clean the drop sensor photocell with a damp cloth. * Ensure the capillary end projection is not too long (aim for approximately 2 mm). * Make sure the flow rate isn't excessively high, causing a continuous flow instead of distinct drops.
General| Brand | GE |
|---|---|
| Model | Frac-920 |
| Category | Laboratory Equipment |
| Language | English |
Provides essential guidance for safe operation, including intended use and safety notices.
Details compliance with directives, standards, and instrument specifications.
Explains the UNICORN control software and lists related user documentation.
Covers general safety, handling hazardous materials, personal protection, and operational safety.
Explains warning symbols, compliance marks, and labels for hazardous substances.
Details emergency shutdown, power failure responses, and equipment recycling guidelines.
Provides information on pollution control labels and hazardous material concentration.
Specifies environmental conditions, power requirements, and safe transport procedures.
Guides on assembling components, making connections, and obtaining spare parts.
Covers starting, menu navigation, parameter setting, method programming, and running.
Details control via UNICORN, flow control, and delay volume settings.
Explains starting, operating modes, and specific functions like feed tube and peak detection.
Outlines general maintenance requirements and procedures for cleaning and component replacement.
Lists common instrument faults and their corresponding corrective actions and solutions.
Lists technical specifications and references other documentation for the instruments.
Provides information on how to obtain ordering details for the instruments and related products.
To Next Page
