GE Frac-920 - Safety Instructions; Safety Precautions

2 Safety instructions
About this chapter
This chapter describes safety compliance, safety labels, general safety precautions,
emergency procedures, power failure and recycling of Fraction Collector Frac-920 and
Frac-950.
2.1 Safety precautions
Introduction
Fraction Collector Frac-920 and Frac-950 are powered by mains voltage and handles
liquids that may be hazardous. Before installing, operating or maintaining the system,
you must be aware of the hazards described in this manual. Follow the instructions
provided to avoid personal injury or damage to the equipment.
The safety precautions in this section are grouped into the following categories:
•
General precautions
•
Using flammable liquids
•
Personal protection
•
Installing and moving the instrument
•
System operation
•
Maintenance
General precautions
Always follow these General precautions to avoid injury when using Fraction Collector
Frac-920 and Frac-950.
WARNING
Do not operate Fraction Collector Frac-920 and Frac-950 in any
other way than described in the Fraction Collector Frac-920 and
Frac-950 Operating Instructions.
14 Frac-920 and Frac-950 Operating Instructions 28-9622-09 AC
2 Safety instructions