Regulatory compliance of
connected equipment
Any equipment connected to Fraction Collector Frac-920 and Frac-950 should meet the
safety requirements of EN 61010-1/IEC 61010-1, or relevant harmonized standards.
Within the EU, connected equipment must be CE marked.
Environmental conformity
This product conforms to the following environmental requirements.
TitleRequirement
Restriction of Hazardous Substances (RoHS) Directive2011/65/EU
Waste Electrical and Electronic Equipment (WEEE) Directive2012/19/EU
Administration on the Control of Pollution Caused by Electronic
Information Products, China Restriction of Hazardous Sub-
stances (RoHS)
ACPEIP
Registration, Evaluation, Authorization and restriction of
CHemicals (REACH)
Regulation (EC)
No 1907/2006
1.3 Instrument
Fraction Collector Frac-920 and Frac-950 are automated fraction collectors for use in
ÄKTA chromatography systems. Fraction Collector Frac-920 can also be used as a stand-
alone unit.
8 Frac-920 and Frac-950 Operating Instructions 28-9622-09 AC
1 Introduction
1.2 Regulatory information
To Next Page
Loading...
