46 4746 47
The stabilizer function is used for less blur picture
caused by hand shake under a dark environment, the
camera would increase the ISO level under the mode to
have a higher shutter speed.
This function may not help to take a clear picture
about a fast moving target, a car passing by with
a speed etc.
This function may not help if you stay on a fast
shaking car, boat etc. It is only for a normal shoot
on a ground by hand.
Increasing the ISO level may cause heavier noise
on the photo.
Use tripod to get a clear picture on ground is
always preferred.
To Next Page
Loading...
Need help?
General
