GE G2 - Image Stabilization Mode

46 4746 47
Image Stabilization mode
Setting the Image Stabilization function under ( )
mode.
(Stabilization during Movie mode is only available when
the Frame Rate is set to 15 fps)
1. Switch the mode dial to (
) mode.
2. Press the
button to enter the
Function
menu.
3. Use the
Left/Right
navigation buttons to highlight
the
Quality
function.
4. Use the
Up/Down
navigation buttons to select
15fps, and press the button to conrm your
settings.
5. Press the
Menu
button, and use
Up/Down
to
select the Image Stabilization settings.
6.
Use
Up/Down
to select
Off
or
On.
Then press the
button to conrm.
The Image Stabilization mode combats the eect of
hand shake and allows you to take pictures that would
otherwise be blurred.
1. Switch the mode dial to ( ) mode.
2. Press
Shutter
halfway to focus on the subject.
3. Press
Shutter
fully to capture the image.