30
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
E0
E1
E2
E3
E4
E5
E6
E7
IMC Fault IMC Fault • Reset IMC by unplugging washer for 30
seconds. Attempt to operate Drain and Spin
cycle.
• Enter Service Mode and check that fault has
cleared.
• If fault persists, or unit does not spin, replace
IMC (Inverter Machine Control).
E8 Motor Over-temp Motor temperature
exceeds 180 degrees F.
• Load too heavy.
• Item caught between wash basket and outer
tub.
Faults D5-E8
To Next Page
Loading...
