GE GL 310 F3/4031 P/VR - If Flexlink Gas Piping Is Already Installed

SPECIAL EQUIPMENT (OPTIONAL)
102 OI 248 (EN) REV6 /REV0
12.2.2 If FlexLink Gas Piping Is Already Installed
To check all gas piping seals we recommend the use of the
following tools:
- T016: Compact open-end wrench (open-ended spanner),
SW24
- WK001: Torque wrench (spanner) with ratchet adapter and
SW27 open-end wrench head
• Retighten filling connections using tool T016 and tool set WK001
to a torque of 30 Nm.
• Retighten all couplings in the gas piping system.
1 Union nut 1x
2 Valve 1x
30Nm
1
2