HANDLING SULFUR HEXAFLUORIDE
16 OI 248 (EN) REV6 /REV3
3.3 Transport at the Installation Site
Pole columns are shipped at a gas gauge pressure of approxima-
tely 0.03 MPa (p
e
) (0.3 bar).
All pressure specifications are given in terms of relative pressure
(p
e
).
The bursting of pressurized parts such as insulators or bushings
may result in property damage or personal injury.
Therefore:
- Do not move pole columns if the gas gauge pressure is
higher than the shipping pressure.
To Next Page
Loading...
