Before YouCallForService...
Troubleshooting tips
Possible Causes What ToDo
Plug on range is not completely * Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet, grounded outlet.
A fuse in your home may * Replace the fhse or reset dm circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Light bulb is loose or defective. * Tighten or replace the bulb.
Switch operating fight * Call for service.
is broken.
Door not open to the broil stop * See the Using the oven section.
position as recommended.
Oven controls improperly set. * Make sure you press the BROILHI/LO pad.
Improper sheff position * See the Broiling Guide.
being used.
Cookware not suited * Use the broiling pan and grid that came with your range.
for broiling.
Aluminum foil used on the * See the Using the oven section.
the broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power * Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil fbr the longest period of"time recommended in
the Broiling Guide.
Oven thermostat * See the Adjust the oven thermostat--Do it yourself!
needs adjustment, section.
Jv_ Plug on range is not * Make sure electrical plug is plugged into a live,
completely inserted in properly grounded outlet.
the electrical outlet.
A fuse in your home may * Replace the fhse or reset tim circuit breaker:
be blown or the circuit
breaker tripped.
Oven controls improperly set. . See the Using tim oven section.
Rear drawer support is
on top of the guide rail.
* Reposifion the drawer. See the Storage Drawer
Removal iustructions in the Care and cleaning of your
range section.
28
To Next Page
Loading...
