GE JVM1750 User Manual

– 23 –
Capacitor and Diode
The capacitor has an internal shunt resistor to
automatically discharge the capacitor when the
oven turns "off". Under normal operation, the
capacitor should fully discharge within 30 seconds.
WARNING: Always be certain the capacitor is
discharged before servicing. Mechanically discharge
the capacitor by placing an insulated-handle
screwdriver between the diode connection of the
capacitor and the oven chassis ground.
Note: Use the screw head close to the capacitor to
ensure ground metal contact.
To remove the capacitor and diode:
Remove the outer cover. (See 1. Outer Cover.)
Disconnect wiring to the high voltage capacitor.2.
Remove the Phillips-head screw that attaches 3.
the capacitor and diode to the oven and remove
the high voltage capacitor.
Disconnect the diode from the high voltage 4.
capacitor.
Disconnect
Disconnect
Diode
High Voltage Transformer
The high voltage transformer is located on the
right side of the microwave oven, beneath the
magnetron.
WARNING: Prior to servicing the transformer, be
certain the capacitor is discharged. Manually
discharge by placing an insulated-handle
screwdriver between the diode connection of the
capacitor and the oven chassis ground.
To remove the high voltage transformer:
Remove the outer cover. (See 1. Outer Cover.)
Disconnect wiring to the high voltage 2.
transformer.
Disconnect
3. Remove 6 Phillips-head screws from the bottom
of the microwave oven cabinet.
View From Right Side
Disconnect
Disconnect
4. Remove 4 Phillips-head screws that attach the
high voltage transformer to the bottom plate.

GE JVM1750 Specifications

General

Brand	GE
Model	JVM1750
Category	Microwave Oven
Language	English