GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
1 - 6 Section 1-2 - Service manual overview
1-2-4 Product description
1-2-4-1 Overview of the LOGIQ S8/LOGIQ E8 ultrasound system
The LOGIQ S8/LOGIQ E8 ultrasound system is a high performance digital ultrasound imaging system
with total data management.
This system provides image generation in B-Mode, Color Doppler, Power Doppler, M-Mode, Color M-
Mode, PW/CW and 3D/4D, Tissue Velocity imaging, Volume-Guided Ultrasound, Elastography, and
Contrast applications.
The fully digital architecture of the LOGIQ S8/LOGIQ E8 allows optimal usage of all scanning modes
and probe types throughout the full spectrum of operating frequencies.
Signal flows from the Probe Connector Panel to the Front End, and then over to the Back End Processor
and finally to the monitor and peripherals.
System configuration is stored on the hard drive in the Back End Processor.
All necessary software is loaded from the hard drive on power up.
To Next Page
Loading...
Need help?
General
