GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 4 - Page 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ P6/P6 Pro
scanner diagnostics by using the built-in service software, and power supply adjustments.
Section 4-2
Required Equipment
• An empty (blank) DVD-R or CD-R Disk.
• At least one transducer.
(normally you should check all the transducers used on the system)
Table 4-1 Contents in Chapter 4
Section Description Page Number
4-1 Overview 4-1
4-2 Required Equipment 4-1
4-3 General Procedure 4-2
4-4 Software Configuration Checks 4-22
4-5 Peripheral Checks 4-23
4-6 Monitor Function Checks 4-24
4-7 Keyboard Function Checks 4-26
4-8 Mechanical Function Checks 4-31
4-9 Board Function Checks 4-37
4-10 Site Log 4-51
To Next Page
Loading...
Need help?
General
