82 GE INFORMATION G500 SUBSTATION GATEWAY INSTRUCTION MANUAL
CHAPTER 7: REMOVING THE G500 FROM SERVICE
Removing configuration data on a PC
When a PC application is used to configure the G500, configuration data resides on the
data storage media (e.g., hard drives, memory cards, etc.) of the PC running the
configuration application.
The G500 configuration data can be removed from the PC by either:
• Recommended: Physically removing and destroying the data storage media, or
• Using a program to securely wipe (that is, completely erase) the data storage media
(that is, not just reformat or remove the names of the files from the file allocation
table).
To Next Page
