GEK-113285A G650 Generator Protection & Control System 10-7
10 APPLICATION EXAMPLES 10.2 EXAMPLE 2: PROCEDURE TO SET AN OPERATION
10
10.2.3 TEST
In the main front screen press F2 key.
A message showing “Press Intro to Confirm Key →F2←” will be displayed.
Press down the rotary knob.
Check that contact_00_00 (board F) has been closed.
Check that the front LED 14
th
is lit.
In the main front screen press F1 key.
A message showing “Press Intro to Confirm Key →F1←” will be displayed.
Press down the rotary knob.
Check that contact_00_00 (board F) has been opened.
Check that the front LED 14th has been switched off
To Next Page
Loading...
