GE NetworX NX-8-EUR User Manual

LOCATION 48 - AUXILIARY OUTPUT 2 (relay 2 and open collector 2), EVENT AND TIME (2 segments, numerical
data)
Segment 1
Use the chart below to select the event that will activate auxiliary output 2
(relay 2)
Segment 2
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 2, location 46). Programming a “0” makes
the output follow the event
LOCATION 49- AUXILIARY OUTPUT 3 (open collector 3), EVENT AND TIME (2 segments, numerical data)
Segment 1
Use the chart below to select the event that will activate auxiliary output 3
Segment 2
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 3, location 46). Programming a “0” makes
the output follow the event
LOCATION 50- AUXILIARY OUTPUT 4 (open collector 4), EVENT AND TIME (2 segments, numerical data)
Segment 1
Use the chart below to select the event that will activate auxiliary output 4
Segment 2
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 4, location 46). Programming a “0” makes
the output follow the event
NX-8-EUR Installation manual Page 58 02/07/06

GE NetworX NX-8-EUR Specifications

General

Brand	GE
Model	NetworX NX-8-EUR
Category	Control Panel
Language	English