LOCATION 166 - CONFIGURATION GROUP 29 ALARM EVENT CODE (1 segment, numerical data)
Location 166 contains the event code that is sent for a Contact ID or SIA report. The desired
event code should be chosen from the list on pages 121-122. The zone ID will be the zone that
is in alarm.
This location is not used for slow speed formats (like 4+2 and 3+1). This location may also
contain the alarm report code for the Robofon format (value 00-99).
LOCATION 167 - CONFIGURATION GROUP 29 CHARACTERISTIC SELECT (5 segments, feature selection data)
Use the “Configuration Group Characteristic Selections” described in Location 111.
LOCATION 168 - CONFIGURATION GROUP 30 ALARM EVENT CODE (1 segment, numerical data)
Location 168 contains the event code that is sent for a Contact ID or SIA report. The desired
event code should be chosen from the list on pages 121-122. The zone ID will be the zone that
is in alarm.
This location is not used for slow speed formats (like 4+2 and 3+1). This location may also
contain the alarm report code for the Robofon format (value 00-99).
LOCATION 169 - CONFIGURATION GROUP 30 CHARACTERISTIC SELECT (5 segments, feature selection data)
Use the “Configuration Group Characteristic Selections” described in Location 111.
LOCATIONS 170-205 - RESERVED
LOCATION 206 – AUTO DISARM DAY SELECTOR (8 segments, feature selection data)
Location 206 selects which days each partition will auto disarm. Segment 1 is for partition 1
and segment 8 is for partition 8.
Segment 1-8
1 = Auto disarming on Sunday
2 = Auto disarming on Monday
3 = Auto disarming on Tuesday
4 = Auto disarming on Wednesday
5 = Auto disarming on Thursday
6 = Auto disarming on Friday
7 = Auto disarming on Saturday
8 = Reserved
NX-8-EUR Installation manual Page 84 02/07/06
To Next Page
Loading...
Need help?
General
