GE NetworX NX-8-EUR User Manual

AUTOTEST CONTROL
Segment 1
Program a “1” if the interval is hours, or a “0” for days.
Add a “2” to suppress the daily test or a “3” to suppress
the hourly test
0
Segment 2
Program the autotest interval from 1-255 days or hours
1
Segment 3
Program the autotest report in 24 hour time format
2
51 58
Segment 4
Program the autotest report time, minutes after the
hour
0
OPENING TIME / AUTO DISARM TIME
Segment 1
Program the hour of the opening time
8
52 58
Segment 2
Program the minutes after the hour of the opening time
0
CLOSING TIME / AUTO ARMING TIME
Segment 1
Program the hour of the closing time / auto arming time
20
53 58
Segment 2
Program the minutes after hour of closing / auto arming time
0
DAYS OF THE WEEK WHEN “ARM ONLY AFTER CLOSE” WILL ARM/DISARM IN PARTITIONS 1-8
Segments 1 2 3 4 5 6 7 8
Sunday 1 1 1 1 1 1 1 1
Monday 2 2 2 2 2 2 2 2
Tuesday 3 3 3 3 3 3 3 3
Wednesday 4 4 4 4 4 4 4 4
Thursday 5 5 5 5 5 5 5 5
Friday 6 6 6 6 6 6 6 6
Saturday 7 7 7 7 7 7 7 7
54
8 8 8 8 8 8 8 8
59
Reserved
DAYS OF THE WEEK WHEN “AUTO ARMING” WILL OCCUR IN PARTITIONS 1-8
Segments 1 2 3 4 5 6 7 8
Sunday 1 1 1 1 1 1 1 1
Monday 2 2 2 2 2 2 2 2
Tuesday 3 3 3 3 3 3 3 3
Wednesday 4 4 4 4 4 4 4 4
Thursday 5 5 5 5 5 5 5 5
Friday 6 6 6 6 6 6 6 6
Saturday 7 7 7 7 7 7 7 7
55 59
Disable retry 8 8 8 8 8 8 8 8
NX-8-EUR Installation manual Page 93 02/07/06

GE NetworX NX-8-EUR Specifications

General

Brand	GE
Model	NetworX NX-8-EUR
Category	Control Panel
Language	English