4 AUTORECLOSE SYSTEM MAP
The Autoreclose System Map describes the System Design of the Autoreclose Logic implemented in this product.
The Autor
eclose is implemented in logical software modules. The logical software modules interact by exchanging
signals between themselves, and with other software processes in the product. Interchange between modules is
limited to digital signals which are realised as either DDB signals or so called “internal signals” (IntSigs). DDB signals
are available for mapping in the PSL. Internal signals are similar to DDBs but they are self-contained within the
device's functions and are not user-accessible.
The Autoreclose System Map shows the interconnection of the logic modules that are used in the Autoreclose
system.
The logic diagrams follow a convention for the elements used, using defined colours and shapes. A key to this
convention is provided below. We recommend viewing the logic diagrams in colour rather than in black and white.
The electronic version of the technical manual is in colour, but the printed version is not. However, coloured
diagrams can be provided on request.
Chapter 7 - Autoreclose P54A/B/C/E
132 P54xMED-TM-EN-1
To Next Page
Loading...
Need help?
General
