GE P50 Agile P253 - Page 52

5 Configuration
P50 Agile P253
5-12
P253/EN M/C
USB Address
1
Read-only
This window shows the USB Address.
USB Parity
None
Read-only
This window shows the USB Parity.
USB Baud Rate
57600
Read-only
This window shows the USB Baud Rate
Password
****
Editable setting
This window is for setting the new Password of the relay. The desired
alpha numeric case sensitive password can be selected from 0000 to
zzzz and each digit can be set i.e. 0 to 9 / A to Z / a to z.
Active Group
Group 1
Read-only
This window shows the Active Group selected in configuration.
Opto I/P 654321
Status 000000
Read-only
This window shows the Opto Input status.
Relay O/P 654321
Status 000000
Read-only
This window shows the Relay Output status.
CB Open / Close
No operation
Editable setting
This window allows selection of the desired CB operation i.e. Open,
Close and No operation.
Opto I/P
DC
Editable setting
This window allows selection of voltage input type for the Opto I/P i.e.
AC / DC
Config Port
USB
Editable setting
This window allows selection of the Configuration Port of the relay
i.e. USB / RP