GE PACSystems RX3i - Add Toolchest Items to Your Project; Place into User Defined Types; Place into Program Blocks; Figure 8; Folders in Dualbus Drawer

Chapter 4. Toolchest Components
12 PACSystems* RX3i Genius Dual Bus Application Guide GFK-2928
The Toolchest now contains the DualBus drawer. Using the dropdown text box, click on DualBus. Expand the
drawer so that the individual folder items are visible as shown below:
Figure 8; Folders in DualBus Drawer
4.1 Add Toolchest items to your project
While depressing the Ctrl key, drag the following items from the Toolchest’s DualBus folders into the PLC
target. Please make certain that the items are added in the proper order:
Place into User Defined Types
Group01 – UDTs
• GCG
• G_Device
Group02 – UDTs
• G_Bus
Place into Program Blocks
When function blocks are dragged from the Toolchest into the Program Blocks collection, Proficy Machine
Edition may prompt for an entry into which a variable name must be provided.
Figure 9: PME Form: Enter Variable Name