GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
Viewer
11-viewer.fm Page no. 111 Chapter 11
To delete ALL USER annotations (graphics and text) present on the image permanently:
• Click the Erase all button. You are asked to confirm the deletion (Yes or No).
Note:
The system annotations cannot be deleted, but you can use the Annotation Level buttons to set
the amount of system annotation displayed. See section 3-2 Annotation Level on page 108 above.
3-4 Geometric transformations
The buttons in this area of the panel allow you to flip or rotate the image to improve viewing comfort or
for easier comparison with other images.
• Click the button for the desired action.
- Flip image around horizontal axis. The top of the image becomes the bottom, and
vice-versa. Left/right orientation is unchanged.
- Flip the image around vertical axis. The left of the image becomes the right, and
vice-versa. Up/down orientation is unchanged.
- Rotate the entire image 90 degrees to the left.
- Rotate the entire image 90 degrees to the right.
• Click Display Normal to return the image to the initial orientation (regardless of how
many flip and rotate operations were performed).
Erase all
Display Normal
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
