Page no. 208 rev_ENG1.fm
GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
5131764-7-1EN August 31, 2007 BO070123_DS&ESS_AUTODELETEFEATURE
- Section "Autodelete" of chapter Browser, sub-chapTools menu utilities,
8-3 MedApp Prefs is improved, with following note:
When the function is turned on, at least one of the profile buttons must
be selected; if the disk system's used capacity reaches the Upper
Threshold value*, the oldest exams are deleted by the system to make
space for new ones, until the disk space reaches the Lower Threshold
value*. Images which have been on the disk for less than the Miminum
Storage time* are not deleted. * Values for Upper Threshold, Lower
Threshold and Minimium Storage time have been adjusted by your Field
Engineer at system installation, according to the workflow information
you provided to him.Call you Field Engineer in case you want to modify
those settings.
BO070511_DS&ESS_PRINTMODEL
- In chapter Printing, illustrations of Printing Models are replaced to
reflect correct software operation.
BO070713_DS&ESS_IHEMEDAPP
- In chapter worklist / section 2 Image Acquisition / 2-1 Medical Proce-
dure Card, the snapshot is updated to show " Implant present " check
buttons. Explanation added.
BO070717_DS&ESS_SPOTPADDLEWITHPV
- In section Processing, a note is added after the existing notes as fol-
lows:
Note: When acquiring images with Spot paddle in Mag mode or in Con-
tact mode, the Premium View algorithm output may not be optimal. In
this case, a satisfactory image display may be obtained by adjusting win-
dow level and window width.
BO070823_AWS storage-capacity
- Chapter "Specifications" - section 1-4 : AWS storage capacity updated
to reflect ADS U20 computer technology.
October 24, 2007 Litchi project
- Sent to translation in EL, TR, HU, PL, RU, DA, FI, NL, NO, SV.
5131764-7-1EN December 12,
2007
Litchi-P project
Sent to translation in PT-PT.
March 5, 2008
Draft for submission to FDA for product Senographe DS:
Introduction of AOP FlexDose feature in Chapter 12
See Read Me for a detailed table of modifications to this publication
REV DATE REASON FOR CHANGE
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
