GE Senographe DS Operator's Manual

Chapter 8 Page no. 66 8-browser.fm
GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
Browser
5-3 List format
• The Browser displays lists of patients, exams, etc., in two formats:
- Two-list format; patients, and examinations.
- Four-list format: patients, examinations, series, and images.
• To change from one format to the other, click the appropriate small icon just above the patients list.
5-4 Application controls
The application control buttons to the right of the Browser lists are used to review images stored on the
workstation database, to start Quality Assurance Procedures (QAP), or to input patient demographics
from the HIS/RIS.
• To review images stored on the workstation: select the desired images on the Browser,
then click on the Review exam button.
• To link with the HIS/RIS and access the Worklist management function: click on the Work-
list button.
• To start Quality Assurance Procedures: click on the QAP button; select the required proce-
dure from the list presented. Refer to the Senographe DS Acquisition QC Manual for more
information on starting and using the Quality Assurance Procedures.
5-5 Network panel
The Network panel at the top of the Browser displays icons represent-
ing the remote hosts and storage devices (such as CD-R) currently
connected to your workstation. See section 7 Network transfer on
page 70 for more information.
Dicom
IC_LMO
SdC
JFR_AWS
CDR
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Senographe DS Specifications

General

Brand	GE
Model	Senographe DS
Category	Medical Equipment
Language	English