STOP Stops the current VCR function such as record, playback,
rewind, or fast forward.
TRACKING Up or Down Lets you manually reduce the streaks
that may appear on the picture during play, slow, or pause.
Reduces picture "jitter" during play-pause.
TV.VCR Switches the picture signal so that it either comes from
the VCR or cable/antenna system.
Playing a Tape
Tune the TV to your VCR viewing channel
(3, 4, or TV's video input).
2. Insert a tape in the VCR.
If the AUTO PLAY feature is set to ON, the tape
automatically begins playback (if the safety tab on the
cassette is _moved).
• Press FWD or REV to position the tape.
• Press PL/Y (if necessa_/) on the remote (PLAY•PAUSE on
VCR) to begin tape play.
• Press PAUSE (PLA_•PAUSE on VCR) for stop action.
• If necessa_ press TRACKING up or down to emove any
streaks from the picture.
• Press STOP on the emote (STOP•EJECT on VCR) to stop
playback.
Pause
If you pause, theVCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Automatic Tracking
TheVCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
anotherVCR. Automatic tracking
is turned on whenever a tape is
inserted or the VCR's power is
turned on.
21
To Next Page
