Recording Features
There are four ways to record programs:
• Recording lets you press one button to start recording a
program. (See VCR Basics section.)
Express Recording lets you start recording a program you
are watching, and then set theVCR to automatically stop
recording after a designated period of time.
Timer Recording lets you program the VCR to
automatically start and stop recording at a predetermined
time.
• Timer Recording with VCR Plus+ lets you program the
VCR just by entering a PlusCode number found in someTV
guides.
Express Recording (XPR)
Use express recording when you want to quickly record the
remaining portion of the program you are watching.
1. Press the SPEED button on the remote if you want to
override the preferredTape Speed setting.
2. Press the RECORD button to begin recording.
3. Repeatedly press the RECORD button to set up the recording
duration.
Rec Ch 36
Record Length 0:00
Press REC to set Length
Rec Ch 36
Record Length 1:30
Press REC to set length
Each time you press the RECORD button, you add 30 minutes to
the recording time (up to 4 hours).
The VCR continues to record for the amount of time you
indicate, and then automatically turns off.
To stop an express recording, press and hold STOP on the
remote (STOP•EJECT on theVCR) for a few seconds, or press
STOP (STOP•EJECT) three times within 5 seconds.
Express Recording
Express recording is a great way to
tape the last quarter of the game, or
the last part of a movie when you
have to leave.
24
To Next Page
