2. Press 1 to display the VCR PLUS+ menu.
,
VCR PLUS+
Enter PlusCode Number
(from TV listing)
Press MENU to cancel
Enter the VCR PlusCode shown in your local television
programming guide.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
4. Press MENU to enter theVCR PlusCode number.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
O Cancel
5. Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/97 TUES
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
VCR Plus+ Recording
Clock must be set correctly,
Insert a tape with the safety tab in
place and enough tape to record the
program.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set, It
flashes if there is no tape in the VCR,
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap,
UNRECOGNIZED NUMBER,,, PLEASE
RE-ENTER appears when the VCR
does not recognize the PlusCode
number,
Turn on the cable box and tune it to
the channel you want to record
before the recording is to begin,
To Next Page
Loading...
