I •
On-screen Displays
The INFO button shows the status of theVCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1. Press INFO to see the on-screen displays.
2. Press INFO again to have only the time counter remain on
the screen.
,
Press INFO again to have no displays appear on the TV
screen. This is useful for dubbing tapes.
Turning off theVCR also resets the displays.
1
2
Tim(
3
Stop Ch 05 0:30:00
11/18/97 Tue 01:30PM SLP
On-screen display _imes ouO
0:30:00
Hours I
Minutes
Seconds
counter only (does not time out)
No displays will appear
34
To Next Page
Loading...
