Go-To Search
The Go-To search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Press STOP.
,
,
Press SEARCH on the remote until the GO-TO SEARCH
menu appears on the screen.
Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to "go to". Press
CLEAR on the remote to correct an entry.
4. Press FWD to search forward or REV to search in reverse.
5. Press STOPto stop Go-To searching.
GO-TO SEARCH
Current tape counter
2:17:25
Press REV or FWD
to go to -:--:00
Press SEARCH to exit.
is
Pro-Tect Plus TM Locking Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
• To Lock: Press and hold the remote's POWER button for
approximately six seconds. The front panel POWER indicator
lights when the feature is activated.
• To unlock the feature and turn on theVCR: Press and hold
the remote's POWER button for approximately six seconds.
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on,
32
To Next Page
Loading...
