GE Vscan Air User Manual

Vscan Air Configuration (for iOS and Android)
4-18 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Configure Modality Worklist Server (continued)
4. Press “Verify Server” to verify communication with the
Modality W
orklist Server.
“Verify server succeed” pop-up message
displays if the
communicat
ion with the Worklist Server is 'est
ablished
success
fully'.
Press OK and then Press “Add” to add the Modality Worklis
t
Server
.
If communication fails, check the server settings and make
necessary corrections.
Figure 4-19. Verify Server
NOTE: Make sure that the display device hosting the Vscan Air app
and the configured network folder are connected to the
same network.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices