Configuration
Vscan Air – User Manual 4-19
Direction GP092020-1EN Rev 18
Configure Modality Worklist Server (continued)
5. Once the Modality Worklist Server is added, the server
name will be available under Server Settings. If this
is the
first Modality
Worklist (MWL) server that is added, it
will be
se
t as the favourite server by default. If there are more than
one MWL/Radiology Information System (RIS) server then
one of them has to be chosen as a favorite server. To select
a MWL server as a favorite, tap on the respective star ma
rk
a
nd press YES on the pop-up message screen.
Figure 4-20. Worklist server as Favourite
To Next Page
Loading...
