Vscan Air Configuration (for iOS and Android)
4-22 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Configure DICOM Image Server (continued)
3. On “Add New Server” screen, select “DICOM Image
Ser
ver” from the drop-down list of “Server Type” and enter
the configuration information in the respective fields to add
the DICOM Image Server.
If DICOM Image Server is of Secure DICOM (T
LS
communicat
ion), select the check box “Secure DICOM”
.
See ‘Secure DICOM’ on page 5-69 for more information.
Figure 4-23. Enter Configuration Information
To Next Page
Loading...
