Configuration
Vscan Air – User Manual 4-23
Direction GP092020-1EN Rev 18
Configure DICOM Image Server (continued)
4. Press “Verify Server” to verify communication with the
DICOM Im
age Server.
“Verify server succeed” pop-up message
displays if the
communicat
ion with the Server is established successfully.
Press OK and then Press “Add” to add the DICOM Ima
ge
Server
.
If communication fails, check the server settings and make
necessary corrections.
Figure 4-24. DICOM Image Server
NOTE: Make sure that the display device hosting Vscan Air app
and the PC in which server is configured are connected to
same network.
To Next Page
Loading...
