Vscan Air Configuration (for iOS and Android)
4-24 Vscan Air – User Manual
Direction GP092020-1EN
Rev 18
Configure DICOM Image Server (continued)
5. Once the DICOM Image Server is added, you will find the
ser
ver name under Server Settings. If this is the first DICO
M
Image Serv
er that you are adding, by
default it will be the
favou
rite server. If there are more than one DICOM Imag
e
Ser
vers, you have to choose the desired DICOM Image
Server as a favourite server. To set DICOM Image Server as
favourite, tap on the respective star mark and press YES on
the pop-up message screen.
Figure 4-25. Select DICOM Image server as favourite
To Next Page
Loading...
