GE Vscan Air User Manual

Configuration
Vscan Air – User Manual 4-25
Direction GP092020-1EN Rev 18
Storage Commit
Storage Server
Storage server is the DICOM image server that receives and
stores exam data from Vscan Air app.
Commitment Server
Commitment Server sends confirmation to the Vscan Air app
when the Storage Server successfully receives and stores the
exam data.
Auto Delete
While configuring a DICOM Image Server (Storage Server), if
you have enabled “Auto Delete” functionality, the exam data will
be deleted automatically from the display device after exporting
it to specified DICOM Image Server.
To enable “Auto Delete” functionality, follow the steps below:
1. While configuring the DICOM Image Server, tap on th
e
Commitment Serv
er drop-down button. See
‘‘Configure
DICOM
Image Server’ on page 4-20 for more information.
2.
En
ter the commitment server details in the respective fiel
ds
on
the Commitment Server screen.
3. Press Verify Commitment Server button to veri
fy
communicat
ion with the commitment server.
“Verify server succeed” pop-up message displays if the
communication with the server is established successfully.
If communication fails, check the server settings and make
necessary corrections.

GE Vscan Air Specifications

General

Battery Life	Up to 50 minutes of scanning
Type	Handheld Ultrasound
Display	Via mobile device (not included)
Connectivity	Wi-Fi
Probe Type	Dual-probe
Charging Time	Approximately 2 hours
Charging	USB-C
Water Resistance	IP67
Transducer Type	Phased Array and Linear Array
Imaging Modes	Color Doppler
Operating System	Android, iOS
Storage	Via mobile device (not included)
Compatibility	Compatible with Android and iOS devices