Geberit HS30 - Regular Maintenance Work

EN
20
9007210246122763 © 05-2023
971.552.00.0(01)
Maintenance
Regular maintenance work
The Geberit HS30 and HS50 hygienic flush units
are low-maintenance.
Recommendation: carry out the
maintenance work described below once a
year.
The Geberit Control app displays when the next
maintenance is due. After the maintenance work
has been carried out, the maintenance interval
must be reset in the Geberit Control app.
Cleaning the cover plate
ATTENTION
Surface damage caused by aggressive and
scouring cleaning agents
▶ Never use aggressive cleaning agents that
contain chlorine or are acidic, abrasive or
corrosive.
▶ Clean the cover plate with a soft, damp and
lint-free cloth.
Checking the solenoid valve unit
1 Demount the cover plate. → See 1 ,
page147.
2 Press the <Test> button on the control unit.
2.(UU7HVW


99


✓ The solenoid valves are opened one after
another for 5seconds.
3 Mount the cover plate. → See 6 , page151.