Geberit HS30 - Page 23

EN
9007210246122763 © 05-2023
971.552.00.0(01)
23
Replacing the flow limiter
The Geberit hygiene flush unit is delivered ex works
with a flow limiter set to 10l/min. Replacing the flow
limiter can limit the flow rate to 4l/min.
1 Demount the cover plate. → See 1 ,
page147.
2 Demount the control unit. → See 2 ,
page147.
3 Demount the solenoid valves. → See 3 ,
page148.
4 Demount the screen filter and flow limiter.
blue
OPLQ
5 Replace the flow limiter (art. no.
243.759.00.1) and mount the screen filter.
OPLQ
grey
6 Note the new flow limiter value on the
control unit sticker with a ballpoint pen.
971.370.00.0(00)
1234
10 l/min
4 l/min
7 Set the new value of the flow limiter in the
Geberit Control app.
For the flush quantities to be calculated
correctly, it is absolutely essential to adjust
the value of the flow limiter in the Geberit
Control app.
8 Mount the solenoid valves. → See 4 ,
page149.
9 Mount the control unit and check that the
solenoid valves function correctly. → See
5 , page150.
10 Mount the cover plate. → See 6 , page151.