28
in.xe™
Config. # P1
P2
BL CP configuration Ozone configuration Filter Type
Heater
Pump
1 2sp 1sp X Always on --- Clean, P1L P1
2 2sp 1sp X Always on --- Purge CP
3 2sp 1sp X --- On during Filter cycle, with P1 Clean, P1L P1
4 2sp 1sp - Duration filtration On during Filter cycle, with CP Clean, CP P1
5 2sp 1sp - Always on Always on with CP Clean, P1L CP
6 2sp 1sp - Duration filtration On during Filter cycle, with CP Clean, CP CP
7 2sp 1sp - --- On during Filter cycle, with P1 Clean, P1L P1
8 2sp - X --- On during Filter cycle, with P1 Clean, P1L P1
9 2sp - - --- On during Filter cycle, with P1 Clean, P1L P1
10 1sp 1sp X --- On during Filter cycle, with P1 Clean, P1L P1
11 1sp 1sp - Duration filtration On during Filter cycle, with CP Clean, CP P1
12 1sp 1sp - Always on Always on with CP Purge CP
13* 1sp Always on Always on with CP Purge CP
programming the in.xe™
Low Level Configuration Selection Chart
Note: Every OEM has its own preset
configurations. The Low level
configuration may differ depending
on the manufacturer.
This for in.xe™ with low level 85 revision 1, 2 and 3.
* Available on Rev 3.00 only
To Next Page
Loading...
Need help?
General
