5
8
7
6
4
3
2
1
117
• Do not dismantle or exchange the rear
side medium-range radar.
Lane change assist (LCA)
The lane change assist function covers the
blind spot area and the rear side quick
oncoming car area, to assist and alert the
driver against blind spots and rear oncoming
cars when driving, especially when turning
or changing lanes. The assist function works
when changing lane at 15~150 km/h.
1. Blind spot area
2. Areas with quick oncoming cars
When the warning condition is met, the blind
spot monitoring indicator on the exterior
rearview mirror is on or flashes. If the sound
warning function is turned on in advance in
the multimedia display, the system will also
give a sound warning.
In some cases, it's difficult for the lane
change warning function to assist the driver.
Possible situations include:
• Bad weather such as rain or snow.
• It doesn't work on stationary targets.
• It doesn't work on pedestrians and
bicycles.
• Sharp turns and open areas.
Collision mitigation support rear
(CMSR)
The collision mitigation support rear function
can monitor the targets behind the vehicle.
When a vehicle is detected quickly
approaching behind, the hazard warning
lamp turns on to remind the rear vehicle to
slow down or keep a safe distance. When a
risk of rear-end collision exists, if the vehicle
features the active pretension seat belt, then
the driver's seat belt will be actively
tensioned.
Starting and driving
To Next Page
Loading...
