3
8
7
6
5
4
2
1
23
Rear seats
Rear seat headrest adjustment
1. Press and hold the adjustment button
under the seat headrest to move the
headrest up and down;
2. Gently press or lift the headrest until you
hear a click to ensure that the headrest
locks in place.
Press and hold the adjustment button
to push inside or pull outside the
headrest.
Folding rear seat backrest
Rear seats consist of the left rear seat and
the right rear seat, which features 4/6
folding function. The boot space is enlarged
for the storage of big items.
1. Put the rear seat headrest to the lowest
position;
2. Buckle the unlocking handle of the rear
seat backrest;
3. Fully fold the seat backrest on the
corresponding side.
After the seat backrests are folded, leave
some space between the rear seat
headrests and the front seats.
Unfolding rear seat backrest
Flip the backrest backward and push hard
backward until the red mark on the
corresponding unlocking handle disappears,
so as to lock it. If not, the seat belt may not
function normally.
When the vehicle is driven, occupants
are not allowed to sit on folded seats
or in the boot. The seats should be properly
used. When the seat backrest returns to the
original position, the following precautions
shall be considered to prevent injuries upon
collision or emergency braking:
• Push the top of the seat backrest forward
and backward to ensure that the seat
back is firmly locked, or it will hinder the
normal operation of the seat belt.
Vehicle description
To Next Page
Loading...
Need help?
General
