8
7
6
5
4
3
2
1
175
Vehicle identification
Vehicle identification number
VIN code is engraved on the beam under
the front occupant seat. Move the seat back
to the end and lift the protective cover. Then
it can be seen.
VIN is on the body bracket at the lower left
corner of the windshield, which can be seen
through the windshield.
Please provide the VIN when
contacting Geely Service. If any
damage occurs to the VIN on the vehicle
body, please contact Geely Service in time.
Use the Geely vehicle diagnosing
instrument to read the vehicle identification
code in a Geely Service. Specific steps are
as follows:
1. Turn off the vehicle power supply;
2. Connect the Geely vehicle diagnosing
instrument to the OBD diagnose
interface;
3. Activate the diagnosing program. Stat
the vehicle, and touch “Welcome”;
4. Read the VIN automatically.
To read the VIN, always do it through
the Geely Service; otherwise, the
vehicle may be damaged.
Vehicle certification label
Type I
This label contains information such as the
vehicle identification code and is located
under the right center pillar.
Type II
This label contains information such as the
vehicle identification code and is located
below the left center pillar.
Technical information
To Next Page
Loading...
Need help?
General
