7
8
6
5
4
3
2
1
163
The freezing point temperature of the
washer liquid should be 10° C lower
than the local minimum temperature.
Wiper blades
Replacement of wiper blade
• Grease, silicon and petroleum products
will weaken the wiping effect of wiper
blades. Wash wiper blades in warm soap
water and check their conditions
regularly.
• Wash windshield frequently, and avoid
using wiper blade to wipe sands on
windshield so as to avoid affecting wiping
effect of wiper blades and reducing their
service life.
• It is necessary to replace wiper blades if
the rubber is found to be hardened or
have cracks, or if wipers leave scratch on
windshield glass or cannot reach a
certain area.
• Clean windshield glass regularly with
qualified glass liquid detergent, and
ensure to clean windshield thoroughly
before replacing wiper blades.
• Only use wiper blades of same
specification as original wiper blades.
• If a wiper or a windshield is covered by
ice or snow or is frozen, it is necessary to
remove ice and snow on the wiper or the
windshield before using the wiper, so as
to prevent the wiper from being
damaged.
• Do not use the wipers when a windshield
surface is dry or there are hard objects
on the surface; otherwise it is possible to
damage wiper blades and windshield.
Repair and maintenance
To Next Page
Loading...
Need help?
General
