3
8
7
6
5
4
2
1
25
1. On the multimedia display screen, click
the buttons Air Conditioner → Seat →
Seat Ventilation in turn, and select to set
the seat ventilation function in this
interface.
2. Click the ventilation adjustment button
under the driver's seat or front
passenger seat.
The seat ventilation indicator indicates
the gear status of the seat ventilation.
When the first gear is on, it indicates that the
seat ventilation is in the low gear. When the
second gear is on, it indicates that the seat
ventilation is in the middle gear. When the 3
gear is on, it indicates that the seat
ventilation is in the high gear. When the
OFF gear indicator is off, it indicates that the
seat ventilation is off.
On the same seat, seat heating and
seat ventilation cannot run
simultaneously.
Driver seat memory function*
On the multimedia display screen, click the
buttons Set up → Smart Cabin → Seat in
turn, and select the seat memory function to
store and retrieve memory information.
Operation methods
1. Adjust the driver's seat to the required
position;
2. After pressing the M button, press one
of the users 1-6 within 3 s, and the seat
memory is completed.
Do not adjust any seat during driving.
Moving the seat during driving may
get the vehicle out of control, resulting in
collision and serious injuries.
Easy access function for driver*
On the multimedia display screen, click the
buttons Set up → Smart Cabin → Seat in
turn, and select to enable or disable the
easy access for driver in the interface.
• Easy out: open the driver's door and the
driver's seat will automatically move
backward, easy for the driver to get off.
• Easy in: when the driver enters the
vehicle and closes the door, the driver's
seat will automatically return to the
position before getting off the vehicle.
During the operation of comfort
function, changing the state of the
vehicle power supply and adjusting the seat
Vehicle description
To Next Page
Loading...
Need help?
General
