3
8
7
6
5
4
2
1
47
Wiper linkage after reversing
On the multimedia display screen, click
Vehicle Setting → Wiper in sequence, and
the wiper linkage function after reversing
can be enabled or disabled in this interface.
When the function is enabled, the front
wiper will wipe, and when reversing, the rear
wiper will intermittently wipe in an automatic
way.
Interior lighting
Front interior lamps
Type I
1. Front left interior lamp switch
2. Interior lamp door-control switch
3. Front right interior lamp switch
Click the left or right front interior lamp
switch to turn on or off the corresponding
front interior lamp separately.
Click the interior lamp door-control switch to
enable or disable the interior lamp door-
control function.
Type II
1. Front interior lamp switch
2. Interior lamp door-control switch
Click the front interior lamp switch to turn on
or off the front interior lamp.
Click the interior lamp door-control switch to
enable or disable the interior lamp door-
control function.
Before enabling the door-control
function of interior lamps to turn on
the left and right interior lamps, turn off the
corresponding lights by clicking the front
interior lamp switch.
Avoid using front interior lamps when
driving at night. Bright lights may
affect driver's safe driving and cause traffic
accidents.
Interior lamp door-control
function
After the door-control function is enabled,
the interior lamp will automatically turn on or
off according to the door status.
The door-control function of interior lamp is
enabled by default. If it needs to be
disabled, press the door-control switch of
Vehicle description
To Next Page
Loading...
Need help?
General
