5
8
7
6
4
3
2
1
131
panoramic image interface in the way
above.
Exit the panoramic image
interface
• Touch the "return" button of panoramic
image interface on multimedia display.
• Switch from the gear R, gear N and gear
D to the gear P without any operation
within 5 seconds, and exit the panoramic
image.
• When the gear is not R, the panoramic
image will exit when the vehicle speed
exceeds the specified speed.
• If the panoramic image is turned on via
turn signal lamp, and the view of
panoramic image is not toggled by other
operations (excluding the toggle of left/
right turn signal lamp), when the turn
signal lamp is turned off, the panoramic
image automatically exits.
Setting interface
The driver can tap the specific area of the
screen to show different pictures as
demand.
1. Exit
Exit the Panoramic Image Interface
2. Parking guiding lines
Touch this button to turn on/off the
parking guiding lines. The button
operation state is memorized when the
system is activated next time.
3. 2D/3D view effect
Switch to 2D/3D view effect.
4. Perspective mode
Open the perspective selection menu to
select more perspectives.
5. Settings
3D surround, vehicle transparency,
steering linkage, radar alarm stereo
display, radar alarm sound, radar
activation panorama and color selection
can be set.
In addition to function buttons above,
directly touch camera icons around
the panoramic image vehicle model to
quickly change the viewpoints of images.
Starting and driving
To Next Page
Loading...
Need help?
General
