2. Seatback Angle Adjustment Lever: tilt
forward and pull the seatback angle adjust-
ment lever upward, then tilt backward to
the desired position and release the lever.
Try to avoid excessive tilt of the seat-
back. When the driver and passenger
sit upright against the seatback, the seat
belt can provide maximum protection in
case of front or rear collision. If you tilt
the seat, the waist belt may slide across
the hip and your belly will be directly
exposed to the pressure. In case of front
collision, the excessive tilt of the seat
will increase the risk of body injury.
Warning
Folding Rear Seatback
Rear seatback can be tilted forward to make
full use of the trunk.
1. Remove the headrest.
2. Unlock the seatback and fold it down.
Split seatback can be folded separately on de-
mand.
1. Seat position and seat cushion height
adjustment switch: move the switch to your
desireddirection to adjust the seat position.
When the switch is released, the seat stops
immediately. Be careful not to leave any object
under the seat, Otherwise the movement of the
seat will be interfered.
2. Seat back.angle adjustment switch: move
the switch to your desired direction to adjust
the angle of the seat back. When the switch is
released, the seat back stops immediately.
Adjust the Front Seat (electric seat)
31
Part I
To Next Page
Loading...
Need help?
General
