Sound Adjustment
1.Press to power on.
2.Press the SEL/LOUD button to select the
item which you wish to adjust:
BAS(bass), TRE(treble), BAL(balance),
FAD(front&back) and VOL(volume).
Corresponding to the ab o ve items, th e
foll o wing dis p lay occu rs in cycle a n d
repeatedly.
EQ Control
Press the EQ/MUT button to switch BT/FLAT/
JAZ/POP/CLAS/ROCK/VOCAL equalizer effect.
MUTE Control
Press the MUT button to switch to the mute
mode, the "MUTE" flash on the LCD. Press
again to cancel.
The function of mute control is only for receiver.
LOUD Control
Press the SEL/LOUD button to increase the
bass volume and treble volume (especially
when it is tiny sound),the "LOUD" will display
on the LCD.Press again to cancel.
3.Press the VOL+ and VOL- button to adjust
the sound.
Adjust each item according to the display on
the display screen.
When not pressing the MOD/LOU button, the
VOL- and VOL+ are the volume adjusting
button.
71
Part I
To Next Page
Loading...
